ADEY Professional Heating Solutions


Adey Magnaclean Micro2 Product Page

Magnaclean Micro2 Promotional Banner

Magnaclean Micro2

Exceptional heating system protection for compact installations

  • • Smallest installation and servicing height in the industry
  • • In-line installation - Possible in a couple of minutes
  • • High performance compact filter - Ideal for tight spaces
  • • Multiple installation options
  • • Low profile drain valve - Easier servicing and dosing
  • • Improved valves - Greater reliability
  • • Dual non-magnetic debris chambers
  • • Twin reverse flow - Maximising debris capture
  • • Speed-fit connectors - Faster servicing
  • • High performance seals

Magnaclean Micro2 Video

close button
Magnaclean Micro2 Video

MagnaClean Demo Jar

How it works in seconds...

Watch the video

Magnaclean Micro2 Technical specification

Magnaclean Micro2 Technical specification details

Technical specification

Canister and Lid

  • Material: Glass reinforced nylon
  • Fluid capacity: 250ml
  • Inlet diameter: 22mm at valve
  • Outlet diameter: 22mm at valve
  • Thread: Pressure thread
  • Flow configuration: Bi-directional – Either port can be inlet
  • Main lid seal: EPDM
  • Valve to canister: EPDM


  • Housing: Stainless steel
  • Length: 97.5mm
  • Diameter: 19mm

Bleed Valve

  • Body material: Nickel plated brass
  • Screw: Nickel plated brass
  • Thread interface: M6
  • Seals: EPDM

Drain port

  • Drain plug material: Nickel plated brass
  • Drain plug thread: M8
  • Seals: EPDM

Triple seal valves

  • Body material: Nickel plated brass
  • Seals material: Long life PTFE ball seals
  • O ring material: EPDM 70 seals x 3
  • Valve inlet/outlet: 22mm

Magnaclean Micro2 Installation

Magnaclean Micro2 Technical installation details


MagnaClean® Micro2 has been developed by the company that pioneered magnetic filtration. ADEY’s filters are already protecting more than three million heating systems in homes throughout Europe removing virtually 100% of the damaging suspended black iron oxide sludge that builds up in all heating systems.

The dual-action filter can be installed anywhere on the main circuit. However, to achieve the best level of protection for the boiler, it is recommended that Micro2 is fitted after the last radiator and before the boiler.

The following instructions are designed to support engineers in the safe and effective installation and servicing of MagnaClean Micro2 and should be followed at all times.

Any queries should be directed to your supervisor or ADEY direct on 01242 546717.

micro2 Installation Diagram 1
micro2 Installation Diagram 2
micro2 Installation Diagram 3
micro2 Installation Diagram 4
micro2 Installation Diagram 5
micro2 Installation Diagram 6
micro2 Installation Diagram 7
micro2 Installation Diagram 8
micro2 Installation Diagram 9
micro2 Installation Diagram 10

Magnaclean Micro2 Servicing


micro2 Servicing Advert
micro2 Servicing Diagram 1
micro2 Servicing Diagram 2
micro2 Servicing Diagram 3
micro2 Servicing Diagram 4
micro2 Servicing Diagram 5
micro2 Servicing Diagram 6
micro2 Servicing Diagram 7
micro2 Servicing Diagram 8

Magnaclean Micro2 - Quick-release trigger Explained

Quick-release trigger information

Quick-release trigger

MagnaClean® Micro2 incorporates a secure, quick-release, trigger which enables the filter to be removed and re-installed in seconds.

The industry leading connections are an integral part of the new MagnaClean Micro2 design. They enable easy and speedy filter removal during annual servicing or to undertake a MagnaCleanse system flush. This also makes it ideal for systems where there is little room to install a filter.

The following instructions are designed to support engineers in the safe and effective servicing of MagnaClean Micro2 using the quick-release trigger.

Magnaclean Micro2 - Multiple installation

Multiple installation options explained

Multiple installation options

MagnaClean® Micro2’s in-line design and 360 rotational valves provide multiple installation options for installers. This ensures greater flexibility within the tightest working environments.

Multiple installation options breakdown

Magnaclean Micro2 - Recommendation

Our recommendation is to fit MagnaClean Micro2 on every new installation on the basis that prevention is better than cure. We also recommend installation after a MagnaCleanse.

The benefits for your customer: A more efficient central heating system, a warmer home, and a longer operational system life.

Note: the final position of the filter must be vertical for best practice protection.


MagnaClean Micro2 MagnaClean Micro2 Installation and Servicing