High performance MC1+ RAPIDE from ADEY, the makers of the market leading MagnaClean® filter, protects against both system corrosion and limescale deposition. MC1+ RAPIDE provides faster, stronger and easier dosing; allowing a 125 litre system to be dosed in just 20 seconds.
Suitable for use in both sealed and open vented central heating systems, old and new.
MC1+ RAPIDE chemical delivers far better central heating system protection than a standard 100 litre inhibitor by future-proofing the system against partial system drain-down. Formulated to provide better protection for the average-sized system AND protect systems with up to 15 radiators.
The latest MC1+ RAPIDE chemical is the product of a considerable amount of industry knowledge and experience built up over a long number of years. It has been developed and tested within ADEY’s own UKAS accredited laboratories here in the UK.
300ml of MC1+ RAPIDE treats up to 125 litres or 15 single panel radiators.
Introduce MC1+ RAPIDE to the system using the adaptor provided via the filling loop, radiator or through a MagnaClean filter air vent.
To ensure ongoing protection, MC1+ RAPIDE levels should be checked regularly during annual system service, or following any system maintenance requiring full or partial drain-down. To ensure adequate treatment level, check the MC1+ RAPIDE concentration using MC1+ Quick Test Kit.
N.B. NOT for use in single feed indirect cylinders.
Solubility: Soluble in water
pH (concentrated solution): 8.0
Density: 1.15 - 1.19 g/cm³
ADEY is a carbon neutral company and cares about the environment. MC1+ RAPIDE is classified as non-hazardous and while delivering effective protection against corrosion and limescale is non-toxic and biodegradable.
EN 9001 & ISO 14001
Warning: Pressurised container. May burst if heated. Protect from sunlight and do not expose to temperature exceeding 50°C. Do not pierce or burn, even after use. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Keep out of reach of children. Use only as directed.