ADEY Professional Heating Solutions

Adey Magnaclean Professional2 Product Page

Magnaclean Professional2 Promotional Banner

Magnaclean Professional2

The UK’s No1 filter just got BETTER

  • • In-line installation - In just two minutes
  • • Versatile installation options
  • • Compact installation for tight spaces
  • • Low profile drain valve - Easier servicing and dosing
  • • Improved valves - Greater reliability
  • • Twin reverse flow - Maximising debris capture
  • • Improved sheath design - Dual non-magnetic capture
  • • Rapid fit connectors for faster servicing
  • • High performance seals
  • • Air vent assembly
Homeowners

Magnaclean Professional2 Video

close button
Magnaclean Professional2 Video

MagnaClean Professional2

The UK’s No1 filter just got BETTER...

Watch the video

Magnaclean Professional2 Technical specification

Magnaclean Professional2 Technical specification details

Technical specification

Canister and Lid

  • Material: Glass reinforced nylon
  • Fluid capacity: 0.55 Litres
  • Inlet diameter: 22mm at valve
  • Outlet diameter: 22mm at valve
  • Thread: Pressure thread
  • Flow configuration: Bi-directional – any port can be inlet
  • Main lid seal: EPDM
  • Valve to canister: EPDM

Magnet

  • Housing: Stainless steel
  • Length: 150mm
  • Diameter: 19mm

Bleed Valve

  • Body material: Nickel plated brass
  • Screw: Nickel plated brass
  • Thread interface: M6
  • Seals: EPDM

Drain port

  • Drain plug material: Nickel plated brass
  • Drain plug thread: M8
  • Seals: EPDM

Triple seal valves

  • Body material: Nickel plated brass
  • Seals material: Long life PTFE ball seals
  • O ring material: EPDM 70 seals x 3
  • Thread diameter: 22mm

Magnaclean Professional2 Installation

Magnaclean Professional2 Technical installation details

Installation

MagnaClean® Professional2 has been developed by the company that pioneered magnetic filtration. ADEY's filters protect more than three million heating systems in homes throughout Europe removing virtually 100% of the damaging suspended black oxide sludge that builds up in all heating systems.

The dual-action filter can be installed anywhere on the main circuit. However, to achieve the best level of protection for the boiler, it is recommended that MagnaClean Professional2 is fitted after the last radiator and before the boiler.

In determining a suitable location, it is important to allow adequate access for servicing.

The following instructions are designed to support engineers in the safe and effective installation and servicing of MagnaClean Professional2 and should be followed at all times.

Any queries should be directed to your supervisor or ADEY direct on : 01242 546700.

Pro2 Installation Diagram 1
Pro2 Installation Diagram 2
Pro2 Installation Diagram 3
Pro2 Installation Diagram 4
Pro2 Installation Diagram 5
Pro2 Installation Diagram 6
Pro2 Installation Diagram 7
Pro2 Installation Diagram 8
Pro2 Installation Diagram 9
Pro2 Installation Diagram 10

Magnaclean Professional2 Servicing

Servicing

Pro2 Servicing Advert
Pro2 Servicing Diagram 1
Pro2 Servicing Diagram 2
Pro2 Servicing Diagram 3
Pro2 Servicing Diagram 4
Pro2 Servicing Diagram 5
Pro2 Servicing Diagram 6
Pro2 Servicing Diagram 7
Pro2 Servicing Diagram 8

Magnaclean Professional2 - Quick-release trigger Explained

Quick-release trigger information

Quick-release trigger

MagnaClean® Professional2 incorporates a secure, quick-release, trigger which enables the filter to be removed and re-installed in seconds.

The industry leading connections are an integral part of the new MagnaClean Professional2 design. They enable easy and speedy filter removal during annual servicing or to undertake a MagnaCleanse system flush. This also makes it ideal for systems where there is little room to install a filter.

The following instructions are designed to support engineers in the safe and effective servicing of MagnaClean Professional2 using the quick-release trigger.

Magnaclean Professional2 - Multiple installation

Multiple installation options explained

Multiple installation options

MagnaClean® Professional2’s in-line design and 360 rotational valves provide multiple installation options for installers. This ensures greater flexibility within the tightest working environments.

Multiple installation options breakdown

Magnaclean Professional2 - Recommendation

Our recommendation is to fit MagnaClean Professional2 on every new installation on the basis that prevention is better than cure. We also recommend installation after a MagnaCleanse.

The benefits for your customer: A more efficient central heating system, a warmer home, and a longer operational system life.

Downloads:

MagnaClean Professional2 MagnaClean Professional2 Installation and Servicing